ATTiny85 Mini Board

From Palta Circuits Wiki
Jump to navigation Jump to search


ATTiny85 minimum system, aka ATTiny85 Mini Board.

ATTiny85 Miniboard Pinout.png

This board is a minimum system for SMD version of ATTiny85. This mini board is suitable for you who are looking for only a minimum system with minimum physical footprint.


And here is the schematic for the board, as a reference.

ATTiny85 Miniboard sch.png


To program this board using Arduino IDE, first you must add additional Board Manager Urls at your Arduino IDE's preferences. I will recommend this package below :

After that you can add additional boards from the Boards Manager. Just search for ATTiny. And then you can add "ATTinyCore by Spence Konde" Then you can choose ATTiny85 for the board. You can use ICSP port (2x3 header) to burn your program into this chip. Don't forget to burned bootloader first before uploading your program. Because the bootloader will set the selected clock, etc for your chip.

How To Get

If you are insterested to get this board, you can visit marketplaces below :


If you wondering how I use these boards, check out video below.

Bahasa Indonesia