ATTinyX26 Mini Board: Difference between revisions
Created page with "==Intro== ATTinyX26 minimum system, aka ATTinyX26 Mini Board. 600px This board is a minimum system from ATTiny 2 Family, which can be use for..." |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 6: | Line 6: | ||
This board is a minimum system from ATTiny 2 Family, which can be use for IC series 826, 1626 or 3226. | This board is a minimum system from ATTiny 2 Family, which can be use for IC series 826, 1626 or 3226. | ||
==Schematic== | ==Schematic== | ||
| Line 25: | Line 24: | ||
The board could be programed using UPDI pin, or using USB-serial if already "burn bootloader" to activate the reset pin. | The board could be programed using UPDI pin, or using USB-serial if already "burn bootloader" to activate the reset pin. | ||
At our board, all IC already burned with the Optiboot and set with PB4 pin as RESET pin. So you can directly use the USB Serial for programming. | At our board, all IC already burned with the Optiboot and set with PB4 pin as RESET pin. So you can directly use the USB Serial for programming. | ||
==Datasheet== | |||
Here is datasheet for ATTiny3226 for reference | |||
[https://ww1.microchip.com/downloads/en/DeviceDoc/ATtiny3224-3226-3227-Data-Sheet-DS40002345A.pdf ATTiny3226] | |||
==How To Get== | ==How To Get== | ||
Latest revision as of 15:09, 20 June 2022
Intro
ATTinyX26 minimum system, aka ATTinyX26 Mini Board.
This board is a minimum system from ATTiny 2 Family, which can be use for IC series 826, 1626 or 3226.
Schematic
And here is the schematic for the board, as a reference.
Pemrograman
To program this board using Arduino IDE, first you must add additional Board Manager Urls at your Arduino IDE's preferences.
I will recommend this package below :
- http://drazzy.com/package_drazzy.com_index.json
After that you can add additional boards from the Boards Manager. Search for megaTinyCore. And then you can add "megaTinyCoreby Spence Konde" Then you can choose the board meet for the ic installed at your board, which could be 826, 1626 or 3226. For our board, we choose only 3226 since it have the biggest memory to store the program. The board could be programed using UPDI pin, or using USB-serial if already "burn bootloader" to activate the reset pin. At our board, all IC already burned with the Optiboot and set with PB4 pin as RESET pin. So you can directly use the USB Serial for programming.
Datasheet
Here is datasheet for ATTiny3226 for reference ATTiny3226
How To Get
If you are insterested to get this board, you can visit marketplaces below :
- https://bit.ly/TP-PALTA (Tokopedia)
- https://bit.ly/SP-PALTA (Shopee)
- https://bit.ly/Tindie-PALTA (Tindie)
Video
For the moment, no video available. (will update once available)