JTAG2UPDI

Intro

This project is based on the project of https://github.com/Dlloydev/jtag2updi

In this board, I include the 12V boost converter to enable the High Voltage programming mode.

What is this for?

This programmer is use for programming tinyAVR 0-Series, 1-Series, 2-Series which using UPDI pin for the programming. To program those ICs using Arduino IDE, you will need to add megaTinyCore board at the board manager. Add this url to your "Additional Board Url" at your Arduino IDE. https://drazzy.com/package_drazzy.com_index.json Search for "megaTinyCore by Spence Konde" to add the boards.

And to use this programmer to upload your code to the IC, select jtag2updi from the programmer menu.