Digital Isolator

From Palta Circuits Wiki
Revision as of 07:52, 21 January 2020 by WikiAdmin (talk | contribs) (Created page with "==Intro== <STRONG>Digital Isolator for FTDI USB-UART</STRONG> 800px This board is a break out board of a 4 channels Digital Isolator chip from...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Intro

Digital Isolator for FTDI USB-UART

This board is a break out board of a 4 channels Digital Isolator chip from Silicon Labs. The main function of this chip is to isolate 2 circuit which each having their own voltage source, and at the same time help them to communicate.

The special of this board is, it is designed with exact pin out of FTDI USB-UART modules which is very common used. So its usage is very simple and easy.

Beside of using SI8642, I also have the version using ADUM1402. The difference is at the maximum data transfer speed. While SI8642 can reach up to 150Mbps, ADUM1402 can have maximum 90Mbps. But it have no issue when I tested it with my FT230XS USB-UART.

Schematic

Here is the schematic of the board.

Reference

Here is the component's datasheet for your reference :

https://www.silabs.com/documents/public/data-sheets/si864x-datasheet.pdf

Where to buy

If you are interested, this board is offered at local marketplace :

- ADUM1402 version : http://bit.ly/TP_DI_ADUM1402

- SI8642 version : http://bit.ly/TP_DI_SI8642


Video

If you want to know the usage of this little board, check this video below



Bahasa Indonesia