Digital Isolator v2

From Palta Circuits Wiki
Revision as of 17:58, 24 November 2020 by WikiAdmin (talk | contribs) (Created page with "==Intro== <STRONG>Digital Isolator for FTDI USB-UART V2.0</STRONG> 600px This board is a breakout board of a 4 channels Digital Isolat...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Intro

Digital Isolator for FTDI USB-UART V2.0

This board is a breakout board of a 4 channels Digital Isolator chip from Analog Device (ADUM1402) or Silicon Labs (SI8642). The main function of this chip is to isolate 2 circuits which each having their own voltage source, and at the same time help them to communicate.

The special about this board is, it is designed with an exact pinout of FTDI USB-UART modules which are very commonly used. So its usage is very simple and easy.

In the first version, there is one pin from the digital isolator that is not connected. Because the common FTDI usage only uses 5 pins. But in this version, all of the IC's pins are broken out, so that if needed, all of the pins are ready to be used.

Schematic

Here is the schematic of the board.

Reference

Here is the component's datasheet for your reference :

Si864x : https://www.silabs.com/documents/public/data-sheets/si864x-datasheet.pdf
ADUM140x : https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM1400_1401_1402.pdf

Where to buy

If you are interested, this board is offered at marketplaces below :


Video

If you want to know the usage of this little board, check this video below



Bahasa Indonesia