LED Cube RGB 4x4x4: Difference between revisions

Revision as of 08:26, 7 June 2020

Intro

This LED Cube RGB 4x4x4 is actually based on Charliecube designed by Asher Glick, which all the informations are available at https://aglick.com/charliecube.html

What I made here is a PCB version, which all the circuitry were made into 2 separated boards, which then will be connected using headers. And these are the 2 boards.

The left one is for LED Pillars. And the right one is for the controller board.

And here are the circuit boards with all the LED Pillars soldered, and the controller board assembled with all the components.

And here is the picture of the LED Cube RGB 4x4x4 in complete form.

As references, here are the schematic of the 2 boards above.

LED board

Controller board

Komponen

Here are the list of all the components needed for these boards.

RGB LED 5mm Common Cathode : 64pcs
Wire : 64pcs
IC ATMega328P-PU : 1pcs
IC Socket 28pin : 1pcs
Crystal 16Mhz : 1pcs
Capacitor 22pF : 2pcs
Capacitor 0.1uF : 6pcs
Capacitor El 10uF : 2pcs
Resistor 10k : 1pcs
Resistor 1K : 1pcs
Pin Header Female 1x6 Right Angle : 1pcs
Pin Header Female 1x8 Straight : 2pcs
Pin Header Male 1x8 Straight : 2pcs
Diode 1n4001 : 1pcs
Tactile Button 6x6x5 Right Angle : 2pcs
Mini Slide Switch : 1pcs
Socket DC PCB Mount : 1pcs
M3x6 Black Pan Padded Screw : 4pcs
M3x5 Male-Female Nylon Spacer : 4pcs
M3x10 Female-Female Nylon Spacer : 4pcs
M3x7x1 Nylon Flat Washer : 4pcs
RGB444 Base Board : 1pcs
RGB444 MinSys Board : 1pcs
Kabel DC Adaptor Charger USB Male to DC 5.5mm : 1pcs

Code

Source code for this LED Cube RGB 4x4x4 also based on Asher Glick's and modified to work with the schematic used here. Source code are available at : https://github.com/paulustanuri/PT018_RGB_LED_Cube_V3.1

Tersedia di

The circuit boards with all the components needed are available in a form of a Kit, complete with the jigs needed.

Available at marketplaces below :

Cara Membuat

The tutorial to assemble and make this LED Cube can be watch at the video below :

Bahasa Indonesia

@@ Line 6: / Line 6: @@
 And these are the 2 boards.
-[[Berkas:Boards.JPG|600px]]
+[[File:Boards.JPG|600px]]
 <br>The left one is for LED Pillars. And the right one is for the controller board.
 <br><br>
@@ Line 12: / Line 12: @@
 And here are the circuit boards with all the LED Pillars soldered, and the controller board assembled with all the components.
-[[Berkas:2modules apart.jpg|600px]]
+[[File:2modules apart.jpg|600px]]
 <br><br>
 And here is the picture of the LED Cube RGB 4x4x4 in complete form.
-[[Berkas:Assembled.jpg|600px]]
+[[File:Assembled.jpg|600px]]
 <br><br>
@@ Line 23: / Line 23: @@
 LED board<br>
-[[Berkas:CubeRGB444 LEDs.png|800px]]<br><br>
+[[File:CubeRGB444 LEDs.png|800px]]<br><br>
 Controller board<br>
-[[Berkas:CubeRGB444 Minsys.png|800px]]<br><br>
+[[File:CubeRGB444 Minsys.png|800px]]<br><br>
 ==Komponen==
-[[Berkas:Components.JPG|800px]]
+[[File:Components.JPG|800px]]
 Here are the list of all the components needed for these boards.
@@ Line 66: / Line 66: @@
 ==Tersedia di==
 The circuit boards with all the components needed are available in a form of a Kit, complete with the jigs needed.
-[[Berkas:Kit single.JPG|800px]]<br><br>
+[[File:Kit single.JPG|800px]]<br><br>
 Available at marketplaces below :
 * https://bit.ly/TP-PALTA (Tokopedia)